Giuseppe Rocca was born in Barbaresco, a small village not far from Alba in the Langhe hills of Piedmont, Italy. After serving in the army, he began working as a baker and pasta maker in Alba in 1828. The circumstances by which Rocca became a violin maker are obscure: after the death of his first wife in 1834, he left Alba and settled in Turin, working for Giovanni Francesco Pressenda. He married again in 1837 and soon afterwards set up on his own, as he tried to surmount his financial difficulties.
\nRocca\u2019s life was marked by debt and mourning: his second wife died in 1842 and he married twice more, the last time in 1851 in Genoa, where he was looking for new opportunities. He also tried to keep his business going in Turin, travelling between the cities for some time and participating in national and international exhibitions \u2013 with varying success. Rocca\u2019s life ended tragically in Genoa, when he was found dead in a well. Police considered his death accidental.
\nRocca\u2019s work varied considerably during his career: in the first few years he used Pressenda\u2019s models, though with his own personal interpretation. He also made some violins for Pressenda in the white after leaving the workshop. After meeting violin dealer and collector Luigi Tarisio in around 1842, he started working on just two violin models \u2013 the 1716 \u2018Messiah\u2019 Stradivari and the 1742 \u2018Alard\u2019 Guarneri \u2018del Ges\u00f9\u2019. The quality of his work in his later period is sometimes less even, as he used inferior wood and varnish of lesser quality in the texture.
\nRocca did not train a single maker: even his son Enrico cannot be considered his pupil.<\/p>\n
This 1839 violin is in beautiful, fresh condition, and still bears its original neck, fingerboard and some of the fittings. Made using an internal mould, it clearly shows Pressenda\u2019s influence: the interior displays great care in the workmanship, no tool marks are visible, the blocks and linings are made of willow, and the linings are set into the centre-blocks with precision.
\nOn the outside, one can notice the purfling set on the rib joint at the button, and the lower one-piece ebony top nut that was inserted in the sides. The ivory end-button is original. The arching is 15mm high at the front and 14.5mm at the back. There are no straight lines in the profile view of the arching \u2013 the curve runs gently and appears to be carved with great confidence.
\nPurfling
\nThe purfling is made of ebony and maple. It is set 3.8mm from the border and runs in a single piece in the upper and lower bouts. The corners have long extensions.
\nF-holes
\nThe flanks of the f-holes are slightly undercut. The scoop of the palette is quite deep and the lower holes show a delicate border around the hole.
\nPegbox
\nThe inside of the pegbox shows inner chamfers cut with a chisel and barely rounded. The wall down from the top nut bears Rocca\u2019s \u2018GR\u2018 autograph, marked with the same ink of the black line that decorates the scroll profile. A thin centre line is visible on both the rear and the front.
\nVarnish
\nThe varnish is of a thick, soft and rich texture. It is laid on to an attractive ground, well gripped, deeply coloured and pleasantly crackled. At some points on the front, the penetration into the wood grain is visible.<\/p>\n
All photos Marco Ricci \u2014 Genova[\/vc_column_text][mk_gallery images=”714,715,716″ height=”250″ hover_scenarios=”slow_zoom” margin_bottom=”50″][\/vc_column][\/vc_row]\n","protected":false},"excerpt":{"rendered":"
[vc_row css=”.vc_custom_1574031663906{margin-bottom: 50px !important;}”][vc_column][vc_column_text css=”.vc_custom_1577399200792{margin-bottom: 0px !important;}”] The Strad magazine, January 2014 issue: In focus: Giuseppe Rocca, Torino 1939 Copyright \u00a9 2014 Alberto Giordano – The Strad magazine. All rights reserved Giuseppe Rocca was born in Barbaresco, a small village not far from Alba in the Langhe hills of Piedmont, Italy. After serving in the […]<\/p>\n","protected":false},"author":1,"featured_media":714,"comment_status":"closed","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"footnotes":""},"categories":[7],"tags":[],"class_list":["post-713","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-the-strad"],"yoast_head":"\n